1. Corrosion resistance and strength:

Drilled 125B Mammoth Enclosure has a fine oxide protective film on its surface, which is not easy to be corroded. It is often used to make chemical reactors, medical equipment, refrigeration equipment, petroleum extraction equipment, oil and natural gas pipelines, etc. It is far less than Drilled 125B Mammoth Enclosure.

2. Quantity:

The specific gravity of the Drilled 125B Mammoth Enclosure is lighter than that of cast iron. The density of cast iron is 7.8g/cm3, and the density of cast aluminum is 2.7g/cm3. For example, in the case of equal construction, the Drilled 125B Mammoth Enclosure is much lighter than the cast iron housing. In terms of weight, the aluminum shell has a great advantage over the cast iron shell, and the strength of the cast iron is higher.

Cast iron is usually in the posture of 200-400MPa, but the weight of aluminum alloy is light. Many industries use aluminum alloy instead of cast iron. However, cast iron still has its advantages and disadvantages. The wear resistance, plasticity and toughness of iron are better summarized.

3.Volume:

For the same factors, Drilled 125B Mammoth Enclosure is relatively light, and the strength of aluminum structure per unit volume is smaller than that of cast iron. Therefore, the volume of aluminum housing is larger than that of cast iron under equal strength. Therefore, the volume of aluminum housing is better than that of cast iron The cast iron shell has some disadvantages. In the case of equal volume, the strength of cast aluminum is less than that of cast iron.