Now the electronics industry is developing rapidly. Many electronic product enclosures are made of Drilled 125B Mammoth Enclosure products. Of course, the quality of the enclosures of different products is different. Enterprises should attach great importance to quality and production efficiency when processing Drilled 125B Mammoth Enclosure products. Many manufacturers experience the phenomenon of Scrap Drilled 125B Mammoth Enclosure products during processing. How to avoid this phenomenon?

1. Squeeze and straighten

Straightening is a very important link in the production process of Drilled 125B Mammoth Enclosure products. The straightener must pay attention to the strength used for straightening. If the strength is too large, it may cause deformation, closing, orange peel and other problems to the aluminum profile; too small strength It may not be straightened again, causing bending. So we must grasp the strength.

2. Extrusion frame

This link is also very important. After the cut length is sawed, the aluminum profile must be framed. This fashion framer needs to pay attention: whether this material is large or small, is it with a tube or a material drawn from a flat die, generally speaking, it is not easy to bend the two ends of the frame when the large and the tube are lifted. , But the small material and the material drawn from the plane die can easily cause bending when lifting both ends. At this time, the material should be lifted and framed by moving closer to the middle from both ends. However, some aluminum profiles do not work even this way, such as shutters, windows, glands, etc., which must be placed on the aged aluminum profile and then lifted into the frame.

3. The surface treatment is put on the shelf

After the aging of the blank, the hardness has reached the standard, so the aluminum profile is not so easy to bend, but you should pay attention to it when lifting the material. Cause a certain bend.

Manufacturers of Drilled 125B Mammoth Enclosure products should pay more attention to the above three points during processing. Compared with plastic shells, Drilled 125B Mammoth Enclosure products have relatively simple processing and good hardness, which exceeds the strength of many plastics and metals. Future development prospects Very impressive, pay attention to relevant details during processing, improve product quality, and prevent the occurrence of scrap.