The customized 1590XX 1790NS Cast Aluminum Enclosure should be careful not only in the production process, but also when it is put into use. For example, when the customized 1590XX 1790NS Cast Aluminum Enclosure is applied to the power supply enclosure, the material of the power supply enclosure in different occasions will be affected. There are certain differences in the requirements. For example, the use of aluminum alloy shells is mainly used in the electronic field, which can effectively reduce the probability of accidents.

The customized 1590XX 1790NS Cast Aluminum Enclosure is widely used in the shell of the product because of its high strength, light weight, good corrosion resistance and easy processing. The aluminum alloy shell needs to pay attention to maintenance and maintenance in daily life, so as to make the aluminum alloy shell more durable, beautiful and durable. So what are the maintenance methods for the customized 1590XX 1790NS Cast Aluminum Enclosure?

1. Do not touch the measuring surface of the measuring tool with your hands. Sweat and other wet dirt on your hands will contaminate the measuring surface and make it rusty. Do not mix the measuring tool with other tools and metal materials to avoid damage to the measuring tool.

2. After using the measuring tool, wipe clean the surface stains and aluminum chips, loosen the fastening device, and apply anti-rust oil on the measuring surface when it is not used for a long time (more than 1 month). When measuring tools are not in use, they should be put in a protective box and used by a dedicated person, and the annual review records of the measuring tools tested by an authoritative unit should be prepared.

3. The storage place of measuring tools should be kept clean, dry, free from vibration and corrosive gas, and should be far away from places with large temperature changes or places with magnetic fields. The measuring tools stored in the measuring tool box should be clean and dry, and other sundries are not allowed to be stored.

4. When there are burrs on the surface of the workpiece, be sure to remove the burrs before measuring, otherwise the measuring tool will be worn and the accuracy of the measurement results will also be affected.

5. Do not use oilstone or emery cloth to rub the surface of the measuring tool, the measuring surface and the engraved part, and it is strictly forbidden to disassemble, modify and repair the measuring tool without authorization.

6. It is not allowed to use the tip of the measuring claw of the customized 1590XX 1790NS Cast Aluminum Enclosure as a needle, compass or other tool, and it is not allowed to twist the two claws or use the measuring tool as a chuck.