NEWS
How to clean Aluminum Die Casting Dies
- Categories:Aluminum Die Casting Dies News
- Author:
- Origin:
- Time of issue:2021-06-11
- Views:0
(Summary description)Aluminum Die Casting Dies is a kind of mold that can make aluminum die-casting products, so that the product specifications and dimensions produced are the same.
How to clean Aluminum Die Casting Dies
(Summary description)Aluminum Die Casting Dies is a kind of mold that can make aluminum die-casting products, so that the product specifications and dimensions produced are the same.
- Categories:Aluminum Die Casting Dies News
- Author:
- Origin:
- Time of issue:2021-06-11
- Views:0
Aluminum Die Casting Dies is a kind of mold that can make aluminum die-casting products, so that the product specifications and dimensions produced are the same. If some parts need to be replaced, we also have alternative products, but long-term use of the mold must be cleaned. The following will introduce you to the small coup of cleaning.
①Clean Aluminum Die Casting Dies with kerosene first to ensure that there are no aluminum slag dust and dirt in the right-angle groove holes and other places that are easy to trap dirt. The sliding parts such as parting surface, cavity, core pulling and mold appearance are clean as new.
②Then use compressed air to dry the mold, especially to ensure that the position of the limit switch and plug is dry and free of oil accumulation.
③Carefully inspect all parts of Aluminum Die Casting Dies according to the fifth item 8-1 standard, and timely transfer the defective parts to the Aluminum Die Casting Dies maintenance area for repair.
④No problem Aluminum Die Casting Dies is hoisted to the maintenance area and coated with anti-rust oil on the guide post, guide sleeve, cavity, parting surface and various sliding parts.
⑤Hang to the "Aluminum Die Casting Dies Storage Area" for fixed location storage, and fill in the "Aluminum Die Casting Dies Loading, Unloading, Repair and Maintenance Card".
Removal Use the corresponding tools to remove Aluminum Die Casting Dies, follow the top-down principle to remove all aluminum slag, oil stains, dust and other dirt on the mold. Be careful not to bump and scratch the cavity, core and other product parts.
This is about the cleaning method of Aluminum Die Casting Dies, so you should understand after I have introduced it to you! If you need Aluminum Die Casting Dies, aluminum die-casting processing customization, you can contact us.
HOTLINE
Ningbo Beilun Jiawei Machinery Co.,Ltd
Add: No.600,Fuchunjiang Rd,Beilun,Ningbo,China 315800
ENGINEERING
CAPABILITIES
QUALITY CONTROL
CONTACT
© 2020 Ningbo Beilun Jiawei Machinery Co.,Ltd All rights reserved. Aluminum Die Casting Manufacturer 浙ICP备12006818号-1 Powered by www.300.cn
© 2020 Ningbo Beilun Jiawei Machinery Co.,Ltd All rights reserved.